USB-DIO-32I

Details

The USB-DIO-32I is an ideal solution for adding portable, easy-to-install digital I/O to any PC or embedded system with a USB port. The USB-DIO-32I is a USB 2.0 high-speed device, offering the highest speed available on the USB 2.0 bus. It is fully compatible with both USB 1.1 and USB 3.0 ports. The unit is plug-and-play allowing a quick connection whenever you need additional I/O on the convenience of a USB port. The USB-DIO-32I features 32 bits of TTL-compatible digital I/O with high-current capabilities. Each digital bit can be programmed to accept an input or to drive an output. Power is supplied to the board via the USB cable or for higher source current capabilities, external power may be used. The I/O wiring connections for USB-DIO-32I are via an industry standard 50-pin connector. For external circuits, fused +5VDC power is available at the connector. This resettable fuse is rated at 0.5A. All I/O lines are buffered by a type ABT tri-stateable buffer transceiver capable of sinking 64 mA or sourcing 32 mA. The buffers are configured under program control for input or output. 10K ohm pull-ups (to +5 VDC) on the board allow for contact monitoring and ensure a known signal level at power-up. The USB-DIO-32I is designed to be used in rugged industrial environments but is small enough to fit nicely onto any desk or testing station. The board itself is PC/104 sized (3.550 x 3.775 inches, 90mm x 96mm) and ships inside a steel powder-coated enclosure with an anti-skid bottom. A DIN rail mounting provision and extended temperature is available for installation in industrial environments.

Ordering Info

• USB-DIO-32I 32-channel individually selectable digital I/O module integrated in rugged enclosure
• USB-DIO-32I-E Economy module, no screw terminal board
• USB-DIO-32I-OEM Board only model, no enclosure or screw terminal board
• Accessories
• STB-50U Spring-cage terminal board for 50-pin mating connector.
• STB-50U Kit Spring-cage terminal board kit used for mounting the STB-50U to the enclosure of the USB-DIO-32I. Includes STB-50U, cable and specialized mounting hardware.
• UTBK-50 Direct connect 50-pin removable screw terminal board
• STB-50 DIN-rail mountable screw terminal board with latches for 50-pin header
• MP104-DIN DIN-rail mounting provision
• CAB50F-6 50-pin ribbon cable with female header connectors, 6 feet long
• CAB50-6 Ribbon cable with 50-pin female edge connector on one end and 50-pin female connector on the other end
• C104-50F-12 50-pin ribbon cable with female headers, 12″ long
• IIB-24 24-channel optical isolator board for each 50-pin header
• ROB-24 24-channel electromechanical relay board for each 50-pin header
• A24A 24-channel mounting card for solid state I/O modules, 50-pin edge connector
• CUSB-EMB-1 1ft USB Type A to micro-fit OEM header
• CUSB-EMB-6 6ft USB Type A to micro-fit OEM header
• CUSB-EMB-HDR 30″ USB 1×5 standard header to micro OEM cable
• CUSB-EMB-HDRM 30″ USB 1×5 metric header to micro OEM cable
• CUSB-EMB 6″ micro-fit to micro-fit embedded OEM cable
• -E Economy module, no screw terminal board
• -OEM Board only model, no enclosure or screw terminal board
• -PR +5VDC external power components and regulated AC/DC adapter
• -ST External power components & screw terminals for power input (high retention)
• -T Extended operating temperature (-40°C to +85°C)
• -RoHS RoHS compliant version
• -Call 24-channel version compatible with industry standard solid state module racks

Downloads