mPCIe-IDO-8

Name: mPCIe with 8 DIO Change-of-State Detection and Solid State FET Relay Outputs
SKU: mPCIe-IDO-8

ACCES I/O

mPCIe with 8 DIO Change-of-State Detection and Solid State FET Relay Outputs

mPCIe-IDO-8

Product Code: mPCIe-IDO-8

Categories: ACCES I/O, Digital Mini-PCIe Modules, I/O Modules

Range: ACCES I/O

Details

The mPCIe-IDO-8 is a type F1 PCI Express Mini Card (mPCIe) interface board that connects to a Mobile-ITX-sized, DB-37M Isolation Module via an included 9” cable. The digital I/O is compatible with 8255 PPI chips for easy programming and are well suited to complex environments, mitigating otherwise challenging ground-loops, high-common-mode, and transient voltage spikes common in electrically-noisy industrial or factory locations. The broad voltage compatibility and high current outputs allows use in a wide range of applications.

The non-polarized inputs support both AC and DC, and configuration jumpers allow 4.7ms input filters to be enabled per-channel, as desired – required for AC use. The isolated inputs support voltages from 3 to 31 VDC/VAC RMS [40Hz to 10000Hz], as well as standard 12/24 AC control transformer signals.

The outputs are fully protected High-Side Power MOSFETs capable of switching from 5 to 34VDC at up to 2A continuous-current load with 10A max current allowed (VBB0 = 5A, VBB1 = 5A).

Ordering Info

mPCIe-IDIO-8 – mPCIe with 8 DIO Change-of-State Detection and Solid State FET Relay Outputs

Downloads

mPCIe-IDIO-8 Family Datasheet (PDF)

0.7MB

System Integration

Please ask about how we can configure your solution

Global Operations

We deliver and support products via offices globally

Full Warranty

Industry leading warranties on all solutions as standard

Technical Support

Experienced engineers are on hand to support your project

Can't Find What You Want?

Custom Design

Specification

Inputs
- Number: 8 (or 4)
- Voltage: 3 to 31 DC or AC RMS (40 to 10000Hz)
- Isolation: 500V channel-to-ground and channel-to-channel
- Resistance: 1.8KΩ in series with opto-coupler
- Filter Response
  - Rise-time: 4.7 ms
  - Fall-time: 4.7 ms
- Non-Filter Response
  - Rise-time: 10 μs
  - Fall-time: 30 μs
FET Outputs and Digital I/O Lines
- Number: 8 (or 4)
- Type: High Side Power MOSFET Switch. Protected against short-circuit, over-temp, ESD; drives inductive loads.
- Current Rating: 2A maximum
- Turn On time: 90μsec (typical)
- Turn Off time: 110μsec (typical)
- Digital Inputs
  - 8 or 4 LVTTL
    - Logic High: 2.0V to VCCIO (3.3VDC, 5VDC tolerant)
    - Logic Low: 0V to 0.8V
- Digital Outputs
  - 8 or 4 LVTTL
    - Logic High: 2.0V (min) 24mA source
    - Logic Low: 0.55V (max) 24mA sink
Environmental
- Temperature
  - Operating: 0°C to 70°C (order -T option for industrial temperature -40°C to 85°C)
  - Storage: -65°C to 150°C
- Humidity: 5% to 95%, non-condensing
- Power required: +3.3VDC @ 360ma (typical)
Physical
- mPCIe card characteristics
  - Weight: 6.2 grams
  - Size
    - Length: 50.95mm (2.006″)
    - Width: 30.00mm (1.181″)
  - I/O connector
    - On-card: Molex 501190-4017 40-pin latching
    - Mating: Molex 501189-4010
- Isolation board characteristics
  - Weight: 38.2 grams, (+11.2 grams for the 9″ cable)
  - Size (Mobile-ITX sized)
    - Length: (2.952″)
    - Width: (1.1.772″)
  - I/O connector
    - On board: Female, D-Sub Miniature, 37-pin
    - Mating: Male, D-Sub Miniature, 37-pin

Delivery Information

Orders dispatched from Assured Systems USA will be delivered using FedEx.

Payment Methods & Options

Accepted payment methods for US customers include bank transfer, VISA or Mastercard in USD.

ACCES I/O: Warranty and Service Information

All ACCES I/O products distributed in the EMEA come with a 2 year warranty as standard, with additional extension options available upon request. As an official ACCES I/O partner, we are proud to provide customers with peace of mind and the highest quality products, including any systems which have been configured to meet individual specifications.