MLB-Z4001
Ethernet to ZigBee Modem Industrial M2M Module
MLB-Z4001
MLB-Z4001
Details
The MLB-Z4001 by Schmidt & Co. is an Ethernet to 900 MHz RF modem designed for Ethernet communication via a ZigBee network. The modem uses an RJ45 ethernet port to receive and transfer data over a specific Mesh networking protocol, featuring dense network operation and support for sleeping routers. The modem can also be configured in a proprietary point-to-multipoint network. The MLB-Z4001 modem can be used to provide wireless communication in a variety of applications, including warehouse, factory automation and street light applications.
Ordering Info
- MLB-Z4001 Ethernet to 900 MHZ Modem
Downloads
System Integration
Please ask about how we can configure your solution
Global Operations
We deliver and support products via offices globally
Full Warranty
Industry leading warranties on all solutions as standard
Technical Support
Experienced engineers are on hand to support your project
Can't Find What You Want?
Specification
- Frequency Band – 902 to 928 MHz, software selectable channel mask for interference immunity
- Power Supply – Input5~32VDC
- Operating Temperature -40~+85 °CESD Protection15 KV
- Power Consumption – Normal mode: mA
- Humidity – 5~95% (non-condensing)
- Weight – 218g (without antenna)
- Casing Material – Metal
- RF Data Rate – 10 Kbps or 200 Kbps
- Indoor/Urban Range – Up to 2000ft. (610m)
- Outdoor/Line-of-sight Range – Up to 9 miles (14 km) w/ dipole antenna Up to 28 miles (45 km) w/ high-gain antenna
- Transmit Power – Up to 24 dBm (250 mW) software selectable
- Receiver Sensitivity-101 dBm @ 200 Kbps, -110 dBm @ 10 Kbps
- Networking Topologies – Mesh, Repeater, Point-to-point, Point-to-multipoint, Peer-to-peer
- Number of Channels, User Selectable Channels – 64 channels available
- Protocol – TCP/IP, UDP, HTTP, ICMP, IPv4, IGMP, DHCP, Telnet
- Encryption – 128 bit AES
- Configuration Tool – Web console/utility
- Spread Spectrum – FHSS (Software Selectable Channels)
- RF Antenna Socket – 50 Ohm SMA
- Power Connector – DC jack connector
- Network Interface – RJ45 connect for Ethernet 10/100M
- LED – 1 x Power, 1 x Tx/Rx, 1 x Ethernet 10/100M Indicator
- Reset – HW Reset
- MTBF – 2,039,188 hrs.
- Certification – EMC EN55022/24
Delivery Information
Orders dispatched from Assured Systems USA will be delivered using FedEx.
Payment Methods & Options
Accepted payment methods for US customers include bank transfer, VISA or Mastercard in USD.
Related Products
You may also like...