MLB-Z1001

COM to ZigBee Modem Industrial M2M Module

MLB-Z1001

-
+

Details

The MLB-Z1001 by Schmidt & Co. is designed for RS-232/422/485 communication via any readily available ZigBee. The MLB-Z1001 modem uses the DB9 & Terminal block connector to provide data communication across the ZigBee network. The MLB-Z1001 modem can be used to provide wireless communication in a variety of applications, including warehouse, AGV and street light applications.

Ordering Info

  • MLB-Z1001 – RS-232/422/485 to 900 MHz Modem

Downloads

System Integration

Please ask about how we can configure your solution

Global Operations

We deliver and support products via offices globally

Full Warranty

Industry leading warranties on all solutions as standard

Technical Support

Experienced engineers are on hand to support your project

Can't Find What You Want?

Specification

  • Frequency Band  902~928 MHz, software selectable channel mask for interference immunity
  • Power Supply Input 5~32VDC
  • Operating Temperature  -40~+85 °C
  • ESD Protection 15KV
  • Power Consumption Normal mode: 32 mA
  • Humidity 5~95% (non-condensing)
  • Weight  212g
  • Casing Material  Metal
  • RF Data Rate 10 Kbps or 200 Kbps
  • Indoor/Urban Range  Up to 2000ft (610m)
  • Outdoor/Line-of-Sight Range  Up to 9 miles (14km) w/ dipole antenna Up to 28 miles (45km) w/ high-gain antenna
  • Transmit Power  Up to 24 dBm (250 mW) software selectable
  • Receiver Sensitivity  -101 dBm @ 200 Kbps  -110 dBm @ 10 KbpsSerial Parameter
  • Baud Rate: 1,200 to 230,400 Bps, Stop Bits: 1, 2, Parity: None, Even, Odd, Flow Control: RTS/CST, XON/XOFF
  • Networking Topologies  Mesh, Repeater, Point-to-point, Point-to-multipoint, Peer-to-peer
  • Number of Channels, user Selectable Channels64 channels available
  • Encryption  128 bit AES
  • Configuration Tool  Web console/utility
  • Spread Spectrum  FHSS (Software Selectable Channels)
  • RF Antenna Socket  50 Ohm SMA
  • Power Connector  DC jack connector
  • Serial Interface  DB9 connector for RS-232 (female) Terminal block connector for RJ-422/485
  • LED  1 x Power,  1 x Tx,  1 x Indicator
  • Reset  HW reset
  • MTBF  2073734 hrs
  • Certification:  EMC, EN55022/24

Delivery Information

Orders dispatched from Assured Systems USA will be delivered using FedEx.

Payment Methods & Options

Accepted payment methods for US customers include bank transfer, VISA or Mastercard in USD.

Related Products

You may also like...

APN-200P Series

Industrial 802.11b/g Wireless LAN Access Point/Bridge/Repeater

IWF 8405

Secure Industrial WLAN Controller for Medium-scale AP Management

GoRugged M1000 XP

Industrial Serial to Cellular Gateway for GSM/GPRS/UMTS Networks

R2000 Dual Module

Robustel R2000 Dual Module 4G Cellular Router with 4 x PoE & Wi-Fi