MAQ20-BKPL8

Details

The MAQ20 system backbone resides within the DIN rail used for module mounting and provides power to and interface between the communications module and the I/O modules. Standard backbones provide for one communication module and 4, 8, 16, or 24 I/O modules. The longest backbone, which accommodates 24 I/O modules, fits in an industry standard 19" rack. Each backbone utilizes a pluggable connector system on each end such that varying system channel counts can be configured using the standard backbones. As a result of this pluggable system, the main part of a system, including the communications module, can be installed in one location while other sets of I/O modules installed in remote locations connect to the main system through a wire harness.Modules mount on industry standard 35x7.5mm gull-wing DIN rails.Once a system is established with a system backbone and a communications module, system configuration is accomplished by applying power and installing the I/O modules. These are hot swappable and true 'plug and run'. When an I/O module is plugged into any backbone position, the communications module automatically recognizes that it has been added to the system, registers it in the system configuration record, and makes it immediately available in the host software for use in data acquisition and control and test and measurement applications. Similarly, when a module is removed from any backbone position, the communications module recognizes that it has been unplugged, removes it from the system configuration, and disables it in the software.

Ordering Info

Communication Modules:

• MAQ20-COM2 communcation module: RS-232, Ethernet & USB
• MAQ20-COM4 communication module: RS-485, Ethernet & USB

Analog Input Modules: 

• MAQ20-VSN – 16 channel single ended voltage input module for MAQ20
• MAQ20-VDN – 8 channel differential voltage input module for MAQ20
• MAQ20-MVDN – 8 channel differential millivoltage input module for MAQ20
• MAQ20-ISN – 16 channel single ended current input module for MAQ20
• MAQ20-IDN – 8 channel differential current input module for MAQ20
• MAQ20-JTC – 8 channel type J thermocouple input module for MAQ20
• MAQ20-KTC – 8 channel type K thermocouple input module for MAQ20
• MAQ20-RSTC – 8 channel type R & S thermocouple input module for MAQ20
• MAQ20-RTD31 – 6 channel 2- or 3-wire RTD & potentiometer input module for MAQ20
• MAQ20-BRDG1 – 4 channel bridge / strain gauge module for MAQ20

Analog Output Modules:

• MAQ20-IO – 8 channel current output module for MAQ20
• MAQ20-VO – 8 channel voltage output module for MAQ20

Digital I/O Modules:

• MAQ20-DIOL – 5 channel digital I/O module w/ 90-280V AC/DC input for MAQ20
• MAQ20-DIOH – 5 channel digital I/O module w/ 3-60V AC/DC input for MAQ20

Backbones:

• MAQ20-BKPL4 – 4 I/O module & 1 communication module backbone for MAQ20
• MAQ20-BKPL8 – 8 I/O module & 1 communication module backbone for MAQ20
• MAQ20-BKPL16 – 16 I/O module & 1 communication module backbone for MAQ20
• MAQ20-BKPL24 – 24 I/O module & 1 communication module backbone for MAQ20
• MAQ20-XCA –  Backbone expansion cable for MAQ20

Power Supplies:

• PWR-PS5RA – 7.5W 24V DC power supply for MAQ20
• PWR-PS5RB – 15W 24V DC power supply for MAQ20
• PWR-PS5RC – 30W 24V DC power supply for MAQ20
• PWR-PS5RD – 50W 24V DC power supply for MAQ20
• PWR-PS5RE – 100W 24V DC power supply for MAQ20
• MAQ20-PWR3 – Load share power supply module w/ 5V DC at 3A for MAQ20

Software:

• MAQ20-940 – ReDAQ Shape
• MAQ20-951 – IPEmotion

Note: LabVIEW and any OPC client software is also supported via MAQ20

Downloads