GB 
DE 
ES 
FR LMP-1204G-SFP-bt
Antaira LMP-1204G-SFP-bt 12-Port Industrial PoE++ 90W Managed Ethernet Switch
LMP-1204G-SFP-bt
- Supports 4*10/100/1000Tx IEEE 802.3bt Compliant with 90W/Port, 4*10/100/1000Tx IEEE 802.3af/at Compliant with 30W/Port, and 4*100/1000 SFP Slots
- Network Redundancy Support: RSTP/MSTP, and G.8032 ERPS v1/v2 (Recovery Time <50ms)
- Configuration: Web Console, Telnet, CLI Command
- Supports IGMP v1/v2/v3, up to 1024 Groups
- Supports QoS (IEEE 802.1p) and CoS/ToS
- Supports IEEE 802.1Q VLAN, SNMP v1/v2c
- Power Input: 48~55VDC in 6-Pin Terminal Block
- Reverse Polarity Protection
- IP30 Protection
- DIN-Rail or Wall Mountable
- Operating Temperature Range – STD: -10°C to 65°C
- 5-Year Warranty
LMP-1204G-SFP-bt
90 Watt PoE++, Antaira, Gigabit PoE, Industrial Ethernet Switches, Industrial Managed Ethernet Switches, Industrial PoE++ Devices, Specialty Solutions
Details
Antaira Technologies’ LMP-1204G-SFP-bt is a 12-port industrial Gigabit PoE++ managed Ethernet switch embedded with 4*10/100/1000Tx Ethernet ports that support IEEE 802.3bt for a maximum of 90W/port, 4*10/100/1000Tx Ethernet ports with IEEE 802.3af/at support for a maximum of 30W/Port, and 4*100/1000 dual rate SFP slots for fiber connection. The LMP-1204G-SFP-bt is a fully-manageable Light Layer 3 Ethernet switch that is pre-loaded with a user-friendly web management console design. It supports the ring network redundancy function using the market’s open standard ITU-T G.8032 Ethernet Ring Protection Switch (ERPS) protocol that has a <50ms network recovery time. The advanced network filtering and security functions, such as IGMP, VLAN, QoS, SNMP, RMON, Modbus TCP, and 802.1X/HTTPS/SSH/SSL increase determinism and improve network management for remote SCADA systems or control networks. The LMP-1204G-SFP-bt is IP30 rated and DIN-rail mountable. There are also a standard temperature range (STD: -10°C to 65°C). It also provides high EFT and ESD protection for industrial networking applications, such as power/utility, water wastewater, oil/gas/mining, factory automation, security surveillance, ITS and any other outdoor or harsh environment.Ordering Info
| LMP-1204G-SFP-bt | 12-Port Industrial Gigabit IEEE 802.3bt PoE++ Light Layer 3 Managed Ethernet Switch, with 4*10/100/1000Tx (90W/Port), 4*10/100/1000Tx (30W/Port), and 4*100/1000 SFP Slots |
| LMP-1204G-SFP-bt-T | 12-Port Industrial Gigabit IEEE 802.3bt PoE++ Light Layer 3 Managed Ethernet Switch, with 4*10/100/1000Tx (90W/Port), 4*10/100/1000Tx (30W/Port), and 4*100/1000 SFP Slots; EOT: -40°C to 75°C |
Downloads
System Integration
Please ask about how we can configure your solution
Global Operations
We deliver and support products via offices globally
Full Warranty
Industry leading warranties on all solutions as standard
Technical Support
Experienced engineers are on hand to support your project
Can't Find What You Want?
Specification
| L2 Switching | Port/MAC/Protocol/IP Subnet-based VLAN, GARP/GVRP, Loop Guard, Link Aggregation static/LACP, BPDU guard, Error disable recovery, IGMP snooping v1/v2/v3, MLD snooping v1/v2, IGMP filtering, IPMC throttling / filtering leave proxy, DHCP snooping, G.8032 v1/v2 |
| L3 Switching | DHCP option82, static routes |
| QoS | 802.1p Queueing, Input priority mapping, Storm control for Unicast/Multicast/Broadcast, Port/Queue/ACL policer, Port egress shaper, Queue egress shaper, DiffServ (DSCP), Tag remarking, Scheduler mode |
| Power Saving | ActiPHY, PerfectReach, IEEE 802.3az EEE power management |
| Network Redundancy | STP/RSTP/MSTP, port trunk with LACP, ERPS v1/v2 (<50ms) |
| Configuration | Http, Https, Telnet, SSH, CLI, TFTP, SNMP v3 |
| System/ Diagnostics | Dual Image Protection, PING, PING6 |
| Switch Architecture | Back-Plane (Switching Fabric): 24Gbps |
| Protocols | IPv4/IPv6, SNMP v1/v2c/v3, LLDP, LLDPMED, HTTP, HTTPS, SSHv2 telnet, DHCP client, DHCPv6 client, DHCP server, Port Mirror, DNS client/proxy, IP based Access Filter, ICMPv6, syslog, Time Zone /Daylight Saving, NTP client, RMON, sFlow, Loop detection, Console Port, USB configuration backup/restore, Power lost warning, relay trigger |
| Priority Queues | 8 |
| Processing Type | Store and Forward |
| Flow Control | IEEE 802.3x for full duplex mode, back pressure for half duplex mode |
| Transfer Rate | 14,880pps for Ethernet Port 148,800pps for Fast Ethernet Port 1,488,000pps for Gigabit Ethernet Port |
| Packet Buffer | 4Mbits |
| Jumbo Frame | 9.6Kbytes |
| MAC Table Size | 8K |
| VLAN Group | 4095 |
| IGMP Group | 1024 |
| Ethernet Port | 8*10/100/1000Base-TX (90W/Port for Port 1~4, 30W/Port for Port 5~8), auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection |
| SFP Port | 4*100/1000 SFP Slots |
| RS232 Serial Console | 1*RS232 in RJ45 |
| LED Indicators | System: Power 1, Power 2, Master (M), Ring (R), Status, PoE Load (P/L) Ethernet ports: Speed/Link/Active PoE: On-connected to PD devices SFP: Link/Active |
| Network Cable | 10Base-T: 2-pair UTP/STP Cat. 3, 4, 5 cable EIA/TIA-568 100-ohm (100m) 100Base-TX: 2-pair UTP/STP Cat. 5 cable EIA/TIA-568 100-ohm (100m) 1000Base-TX: 4-pair UTP/STP Cat.5/5E cable; EIA/TIA-568 100-ohm (100m) |
| Housing | Metal, IP30 protection |
| Dimensions | 54 x 142 x 99mm (W x H x D) |
| Weight | Unit: 2.38 lbs Shipping: 3.07 lbs |
| Mounting | DIN-Rail Mounting, Wall Mounting |
| Input Voltage | 48-55VDC Redundant Power Inputs |
| Power Connection | Removable 6-Contact Terminal Block |
| Relay Content | 24VDC, 1A resistive |
| PoE Pin Assignment | V-, V-, V+, V+ for pin 1, 2, 3, 6; V+, V+, V-, V- for pin 4, 5, 7, 8 *Support Modes: Mode A, Mode B, 4- Pair Mode |
| Overload Current Protection | Present |
| Reverse Polarity Protection | Present |
| System Power Consumption | 12.5W |
| PoE Power Budget | 240W @48~55VDC |
| Operating Temperature | STD: -10°C to 65°C EOT: -40°C to 75°C |
| Storage Temperature | -40°C to 85°C |
| Ambient Relative Humidity | 5% to 95%, (non-condensing) |
| EMI | FCC Part 15 Subpart B Class A, CE EN55032/EN61000-6-4 Class A |
| EMS | CE EN55035/EN61000-6-2 Class A: IEC61000-4-2,3,4,5,6,8 |
| Free Fall | IEC60068-2-32 |
| Shock | IEC60068-2-27 |
| Vibration | IEC60068-2-6 |
| Green | RoHS Compliant |
| Certifications | FCC, CE |
| Warranty | 5 Years |
Delivery Information
Orders dispatched from Assured Systems USA will be delivered using FedEx.
Payment Methods & Options
Accepted payment methods for US customers include bank transfer, VISA or Mastercard in USD.
Antaira: Warranty and Service Information
Assured Systems are proud partners of Antaira, offering a 2 year warranty with all Antaira products distributed in the EMEA. Extended warranty options are available upon request.
Related Products
You may also like...
LMP-1204G-SFP-bt-24
Antaira LMP-1204G-SFP-bt-24 12-Port Industrial PoE++ Managed Ethernet Switch
- Switch Category: Managed PoE
- PoE Power: 30W
- Total Port Count: 12 Ports
- Fiber Ports: 4 Ports
- Fiber Connection Type: SFP
- Power Input: 12 to 55 VDC
LMP-0702G-SFP-bt-V2
Antaira LMP-0702G-SFP-bt-V2 7-Port Industrial Gigabit Managed Ethernet Switch
- Switch Category: Managed PoE
- PoE Power: 90W
- Total Port Count: 7 Ports
- Fiber Ports: 2 Ports
- Fiber Connection Type: SFP
- Power Input: 48 to 55 VDC
LNX-0501-S3-T
Antaira LNX-0501-S3-T 5-Port Industrial Unmanaged Ethernet Switch, with 4*10/100Tx and 1*100Fx Single-Mode Fiber (30Km), SC Connector; EOT: -40° to 75°C
- Switch Category: Unmanaged Non-PoE
- Fiber Ports: 1 Port
- Fiber Connection Type: SC
- Power Input: 12 to 48 VDC
CA