GB 
DE 
ES 
FR M.2-AIO16-16F
Acces I/O M.2-AIO16-16F 16-Bit 1MHz x 2 M.2 Card 2260/2280 B/M size
M.2-AIO16-16F
- M.2 2260/2280 “B/M” size Card with latching I/O connectors
- 2× 16-bit, bipolar, differential, A/D converters sampling at up to 1MHz, simultaneously (2MSPS aggregate)
- Software selectable as 16+0, 8+4, or 0+8 (single-ended + differential inputs)
- Seven channel-by-channel Programmable differential input ranges from ±0.3125V up to ±12V
- A/D starts via software, external input, or periodic timer
- A/D “scan start” mode optimizes inter-channel timing
- High Impedance, 16-channel input: 500 MΩ
- 4k Sample FIFO plus DMA for efficient, robust data streaming
- Four 16-Bit Analog Outputs
- 5 per-channel programmable ranges: 0-5V, 0-10V, ±2.5V, ±5V, ±10V
- Outputs drive ±10mA
- “FDS” model allows hardware-timed DMA+FIFO (8k Samples) waveform streaming on up to four DACs
- Two digital I/O with flexible secondary functions
- Onboard watchdog with status output
- RoHS Standard
- 4-20mA or 10-50mA ADC input ranges
- Extended temperature operation (-40°C to +85°C)
- Support for Wind River VxWorks
Details
The M.2-AIO16-16F is an ideal solution for adding high-speed analogue I/O capabilities to any computer with an M.2 slot.
The M.2-AIO16-16F is a 16-bit resolution A/D & D/A board with two simultaneous 1MHz A/D converters, with 8 single ended or 4 differential analogue inputs multiplexed to each ADC. Each channel can be independently software configured to accept any of 8 different input ranges. Four analogue outputs with uni and bipolar 5 and 10 volt ranges and a ±2.5V range round out the feature set.
The “FDS” model includes a new DMA-driven hardware-timed buffered DAC output feature, “DAC Waveform Streaming”. This feature allows one or more of the DACs to output voltage levels at a software-configurable rate as high as 1 million samples/second. Although the maximum rate is divided by the number of DACs being used, all DACs’ outputs update simultaneously on the hardware clock’s tick — all four DACs can output simultaneous data at 250 kilo samples/second, or one at 1 MHz! All the data is transferred by DMA to minimize CPU utilization, with IRQs so applications can send additional buffers of data as needed.
This tiny analogue I/O board provides the user with everything needed to start acquiring and controlling signals in a variety of applications. The mPCIe-AIO16-16F data acquisition board can be used in many current real-world applications such as embedded equipment monitoring, precision PC-based and portable environmental measurements, and mobile data acquisition. The board is designed to be used in rugged industrial environments and is double sided, mPCIe F1 sized.
Applications: Optical Networking, Instrumentation, Multichannel Data Acquisition and system monitoring, Automatic Test Equipment, Process Control and Industrial Automation, Power line monitoring.
Accessories and ConnectionsAvailable accessories include a variety of screw terminal boards for quick and easy connectivity as well as 2mm mounting hardware. Alternately, custom hardware cables and/or interfaces can be produced to fit your specific application requirement.
SOFTWAREThe card is supported for use in most operating systems and includes a free Linux and Windows compatible software package. This package contains sample programs and source code in Visual Basic, Delphi, and Visual C++ for Windows. Also provided is a graphical setup program in Windows. Linux support includes installation files and basic samples for programming from user level via an open source kernel driver. Third party support includes a Windows standard DLL interface usable from the most popular application programs. Embedded OS support includes the family of Windows Operating Systems including IoT. ACCES is also now offering a VxWorks driver/library for the ultimate real-time process monitoring and control solution.
Ordering Info
| PC Interface | |
| M.2 Card | M.2 2260/2280 with B & M Key 1.2 |
| Analogue Inputs | |
| ADC Type | Successive Approximation |
| Resolution | 16-bit |
| Sampling Rate | 2Msamples/second aggregate (1MHz per ADC, simultaneous) |
| Number of Channels | 16 Single-Ended or 8 Differential (software selectable) |
| Unipolar Ranges | 0-1V, 0-2V, 0-5V, 0-10V |
| Bipolar Ranges | ±1V, ±2V, ±5V, ±10V |
| 4-20mA or 10-50mA | Factory Option |
| Accuracy | 0.094% Full-Scale (FS) Uncalibrated, 0.0015% FS Calibrated (for best accuracy, system calibration is recommended) |
| Integral Nonlinearity Error | 0.0011% FS |
| No Missing Codes | 16 bits |
| Input Impedance | 1MΩ |
| A/D Start Sources | Software, Timer, External; rising or falling edge, software selectable |
| A/D Start Enable | Externally supplied (pulled-up active-high input) |
| A/D Start Types | Single Channel, Scan of Channels (software selectable) |
| Channel Oversample | 1 to 256 consecutive samples /channel dwell |
| Overvoltage Protection | -40 to +40V |
| Crosstalk | -53dB @ 1MHz, -84db @ 500kHz |
| Analogue Outputs | |
| Number | 4 |
| Type | Single-Ended |
| Resolution | 16-bit |
| Unipolar Ranges | 0-5V, 0-10V (factory option) |
| Bipolar Ranges | ±2.5V, ±5V, ±10V (default) |
| Conversion Rate | ≥125kHz per channel |
| Setting Time | 4µs typical, 7µs max; ¼ to ¾ scale, to ±2 least-significant bits |
| Output Current | ±10mA per channel |
| Digital Inputs/Outputs | |
| Lines | 2, individually software configurable as input or output |
| Input Voltage | Logic Low: 0V to 0.8V Logic High: 2V to 5V |
| Input Current | ±20µA (max) |
| Output Voltage | Logic Low: 0V to 0.55V Logic High: 2V to 5V |
| Output Current | Logic Low: 64mA sink (max) Logic High: 32mA source (max) |
| Environmental | |
| Temperature | Operating: 0°C to 70°C (order -T option for industrial temperature -40°C to +85°C) Storage: -40°C to 105°C |
| Humidity | 5% to 95%, non-condensing |
| Power Required | +3.3VDC @ 300ma (typical) |
| Physical | |
| Weight | 5.8 Grams (plus 22.2g for the cable |
| Size | Length: 80mm with breakaway to shorten to 60mm |
| Width: 22mm | |
| I/O Connector | On-card: Molex 501190-4017 40-pin latching |
| Mating: Molex 501189-4010 | |
| On cable: Male, D-Sub Miniature, 37-pin | |
| Mating: Female, D-Sub Miniature, 37-pin | |
| Regulatory Compliance | |
| This product is designed to be in full compliance with CE requirements. |
Downloads
System Integration
Please ask about how we can configure your solution
Global Operations
We deliver and support products via offices globally
Full Warranty
Industry leading warranties on all solutions as standard
Technical Support
Experienced engineers are on hand to support your project
Can't Find What You Want?
Specification
| PC Interface | |
| M.2 Card | M.2 2260/2280 with B & M Key 1.2 |
| Analogue Inputs | |
| ADC Type | Successive Approximation |
| Resolution | 16-bit |
| Sampling Rate | 2Msamples/second aggregate (1MHz per ADC, simultaneous) |
| Number of Channels | 16 Single-Ended or 8 Differential (software selectable) |
| Unipolar Ranges | 0-1V, 0-2V, 0-5V, 0-10V |
| Bipolar Ranges | ±1V, ±2V, ±5V, ±10V |
| 4-20mA or 10-50mA | Factory Option |
| Accuracy | 0.094% Full-Scale (FS) Uncalibrated, 0.0015% FS Calibrated (for best accuracy, system calibration is recommended) |
| Integral Nonlinearity Error | 0.0011% FS |
| No Missing Codes | 16 bits |
| Input Impedance | 1MΩ |
| A/D Start Sources | Software, Timer, External; rising or falling edge, software selectable |
| A/D Start Enable | Externally supplied (pulled-up active-high input) |
| A/D Start Types | Single Channel, Scan of Channels (software selectable) |
| Channel Oversample | 1 to 256 consecutive samples /channel dwell |
| Overvoltage Protection | -40 to +40V |
| Crosstalk | -53dB @ 1MHz, -84db @ 500kHz |
| Analogue Outputs | |
| Number | 4 |
| Type | Single-Ended |
| Resolution | 16-bit |
| Unipolar Ranges | 0-5V, 0-10V (factory option) |
| Bipolar Ranges | ±2.5V, ±5V, ±10V (default) |
| Conversion Rate | ≥125kHz per channel |
| Setting Time | 4µs typical, 7µs max; ¼ to ¾ scale, to ±2 least-significant bits |
| Output Current | ±10mA per channel |
| Digital Inputs/Outputs | |
| Lines | 2, individually software configurable as input or output |
| Input Voltage | Logic Low: 0V to 0.8V Logic High: 2V to 5V |
| Input Current | ±20µA (max) |
| Output Voltage | Logic Low: 0V to 0.55V Logic High: 2V to 5V |
| Output Current | Logic Low: 64mA sink (max) Logic High: 32mA source (max) |
| Environmental | |
| Temperature | Operating: 0°C to 70°C (order -T option for industrial temperature -40°C to +85°C) Storage: -40°C to 105°C |
| Humidity | 5% to 95%, non-condensing |
| Power Required | +3.3VDC @ 300ma (typical) |
| Physical | |
| Weight | 5.8 Grams (plus 22.2g for the cable |
| Size | Length: 80mm with breakaway to shorten to 60mm |
| Width: 22mm | |
| I/O Connector | On-card: Molex 501190-4017 40-pin latching |
| Mating: Molex 501189-4010 | |
| On cable: Male, D-Sub Miniature, 37-pin | |
| Mating: Female, D-Sub Miniature, 37-pin | |
| Regulatory Compliance | |
| This product is designed to be in full compliance with CE requirements. |
Delivery Information
Orders dispatched from Assured Systems USA will be delivered using FedEx.
Payment Methods & Options
Accepted payment methods for US customers include bank transfer, VISA or Mastercard in USD.
ACCES I/O: Warranty and Service Information
All ACCES I/O products distributed in the EMEA come with a 2 year warranty as standard, with additional extension options available upon request. As an official ACCES I/O partner, we are proud to provide customers with peace of mind and the highest quality products, including any systems which have been configured to meet individual specifications.
Related Products
You may also like...
CA