USB-DIO-32

32-Channel, USB Digital Input/Output Module

USB-DIO-32

The USB-DIO-32 is an ideal solution for adding portable, easy-to-install digital I/O and counter capabilities to any computer with a USB port. The USB-DIO-32 is a USB 2.0 device, offering the highest speed available with the USB bus. It is fully compatible with both USB 1.1 and USB 2.0 ports. The unit is plug-and-play allowing quick connect or disconnect whenever you need additional I/O on your USB port. The USB-DIO-32 features 32 bits of TTL-compatible digital I/O with high-current capabilities and three optional 82C54 counters. Each digital port can be programmed to accept inputs or to drive outputs on four 8-bit ports, designated as port A, B, C, and D. Power is supplied to the unit via the USB cable or for higher current capabilities, external power may be used. The I/O wiring connections for USB-DIO-32 are via an industry standard 50-pin connector. For external circuits, fused +5VDC power is available at the connector. This resettable fuse is rated at 0.5A. All I/O lines are buffered by a type 74ABT245 tristate buffer transceiver capable of sinking 64 mA or sourcing 32 mA. The buffers are configured under program control for input or output. Pull-ups (to +5 VDC) or pull-downs (to ground) on the board allow for contact monitoring and assure that there are no erroneous outputs at power-up until the module is initialized by system software. Unlike most USB digital I/O products which primarily use a human interface device (HID) driver, ACCES offers an easy to use, Windows-based, custom function driver optimized for maximum data throughput. This approach exposes the full functionality of the hardware along with maximizing the advantage of using the high-speed USB 2.0 bus.

  • Brand: Acces IO
  • Small (3.5 by 3.7 in.), portable, 32-channel USB digital I/O module
  • Four 8-bit ports independently selectable for inputs or outputs
  • High-Speed USB 2.0 device, USB 3.0 compatible
  • Size: 101.6mm (W) x 101.6mm (L) x 31.75mm (D)
-
+

Details

The USB-DIO-32 is an ideal solution for adding portable, easy-to-install digital I/O and counter capabilities to any computer with a USB port. The USB-DIO-32 is a USB 2.0 device, offering the highest speed available with the USB bus. It is fully compatible with both USB 1.1 and USB 2.0 ports. The unit is plug-and-play allowing quick connect or disconnect whenever you need additional I/O on your USB port. The USB-DIO-32 features 32 bits of TTL-compatible digital I/O with high-current capabilities and three optional 82C54 counters. Each digital port can be programmed to accept inputs or to drive outputs on four 8-bit ports, designated as port A, B, C, and D. Power is supplied to the unit via the USB cable or for higher current capabilities, external power may be used. The I/O wiring connections for USB-DIO-32 are via an industry standard 50-pin connector. For external circuits, fused +5VDC power is available at the connector. This resettable fuse is rated at 0.5A. All I/O lines are buffered by a type 74ABT245 tristate buffer transceiver capable of sinking 64 mA or sourcing 32 mA. The buffers are configured under program control for input or output. Pull-ups (to +5 VDC) or pull-downs (to ground) on the board allow for contact monitoring and assure that there are no erroneous outputs at power-up until the module is initialized by system software. Unlike most USB digital I/O products which primarily use a human interface device (HID) driver, ACCES offers an easy to use, Windows-based, custom function driver optimized for maximum data throughput. This approach exposes the full functionality of the hardware along with maximizing the advantage of using the high-speed USB 2.0 bus.

Ordering Info

  • USB-DIO-32 32-channel digital I/O module integrated in rugged enclosure with screw terminal board
  • USB-DIO-32-E Economy module, no screw terminal board
  • USB-DIO-32-OEM Board only model, no enclosure or screw terminal board
  • UTBK-50 Direct connect 50-pin removable screw terminal board
  • MP104-DIN DIN-rail mounting provision STB-50 DIN-rail mountable screw terminal board for 50-pin header type connector
  • CAB50F-6 50-pin ribbon cable with female header connectors, 6 feet long CAB50-6 Ribbon cable with 50-pin female edge connector on one end and 50-pin female connector on the other end
  • C104-50F-12 50-pin ribbon cable with female headers, 12″ long
  • IIB-24 24-channel optical isolator board for each 50-pin header
  • ROB-24 24-channel electromechanical relay board for each 50-pin header
  • A24A 24-channel mounting card for solid state I/O modules, 50-pin edge connector
  • CUSB-EMB-1 1ft USB Type A to micro-fit OEM header
  • CUSB-EMB-6 6ft USB Type A to micro-fit OEM header
  • CUSB-EMB-HDR 30″ USB 1×5 standard header to micro OEM cable
  • CUSB-EMB-HDRM 30″ USB 1×5 metric header to micro OEM cable
  • CUSB-EMB 6″ micro-fit to micro-fit embedded OEM cable
  • -E Economy module, no screw terminal board
  • -OEM Board only model, no enclosure or screw terminal board
  • -P External power components and AC/DC adapter
  • -ST External power components & screw terminals for power input (high retention)
  • -T Extended operating temperature (-40°C to +85°C)
  • -Call 24-channel version compatible with industry standard solid state module racks
  • -RoHS RoHS compliant version

Downloads

System Integration

Please ask about how we can configure your solution

Global Operations

We deliver and support products via offices globally

Full Warranty

Industry leading warranties on all solutions as standard

Technical Support

Experienced engineers are on hand to support your project

Can't Find What You Want?

Specification

  • Small (3.5 by 3.7 in.), portable, 32-channel USB digital I/O module
  • Four 8-bit ports independently selectable for inputs or outputs
  • High-Speed USB 2.0 device, USB 3.0 compatible
  • All 32 I/O lines buffered with Sink 64mA / Source 32mA current capabilities
  • Standard 50-pin IDC connector with key
  • Removable screw terminal adaptor for easy wiring
  • USB/104 form-factor for OEM embedded applications
  • OEM version (board only) features PC/104 module size and mounting compatibility
  • Alternate micro-fit embedded USB header connector
  • Custom high-speed function driver (non-HID)
  • Type B USB connector features industrial strength and high-retention design
  • Small (4″ x 4″ x1.25″) rugged industrial enclosure
  • Labview VI driver

Delivery Information

Orders dispatched from Assured Systems USA will be delivered using FedEx.

Payment Methods & Options

Accepted payment methods for US customers include bank transfer, VISA or Mastercard in USD.

ACCES I/O: Warranty and Service Information

All ACCES I/O products distributed in the EMEA come with a 2 year warranty as standard, with additional extension options available upon request. As an official ACCES I/O partner, we are proud to provide customers with peace of mind and the highest quality products, including any systems which have been configured to meet individual specifications.

Related Products

You may also like...

RDI-54

Remote Acces 54-Bit Digital Input Pod

104-AIM-32

Analog Multiplexer

104-II32-4RO

Isolated Input/Relay Module

RDAG12-8(H)

Remote Analog Output Digital I/O Pod